Month: October 2013

To determine next Thursday’s date: Use: Dim dt as Date dt = NextXDay(vbThursday)   And the function: Function NextXDay(ByVal vbDay As Integer) As Date Dim newdate As Date newdate = Date + 1 NextXDay = newdate + (vbDay – DatePart(“w”,

Tagged with: , ,

Enable an administrator to restrict access to specific hosts from specific machines. This procedure is intended for use with Verizon’s Actiontec Routers and was tested with firmware version  4.0.16.1.56.0.10.14.4 1. Using a web browser, connect and authenticate to the router.

Tagged with: , , ,

VirtualBox isn’t configured to access the kernel. Install your kernel libraries and headers sudo yum -y install kernel-devel Recompile the VirtualBox driver sudo /etc/init.d/vboxdrv setup Post created by: David Gregory Medina

Tagged with: , , ,

RJ-45 to DB-9 Adapter Crossovers Serial Port (RJ-45 Connector) DB-9 Adapter Cable Pin Signal Description Pin Pin Color 1 RTS 8 CTS Grn 2 DTR 6 DSR Grn/Wht 3 TXD 2 RXD Org 4 Signal Ground 5 Signal Ground Org/Wht

Tagged with: , , , ,

show /SYS/MB/CMP0/BR0/CH0/D# Targets: SEEPROM SERVICE PRSNT T_AMB Properties: type = DIMM component_state = Enabled fru_name = 4096MB DDR2 SDRAM FB-DIMM 333 (PC2 2600) fru_description = FBDIMM 4096 Mbyte fru_manufacturer = Samsung fru_version = FFFFFF fru_part_number = 501-7954-01 Rev 05 fru_serial_number

Tagged with: , ,

set pendingipaddress=<ip_address> set pendingipdiscovery=static set pendingipnetmask=255.255.255.0 set pendingipgateway=<ip_address> set commitpending=true Post created by: David Gregory Medina

Tagged with: ,

ALOM: ILOM: diag_level /HOST/diag level diag_mode /HOST/diag mode diag_trigger /HOST/diag trigger diag_verbosity /HOST/diag verbosity if_connection /SP/services/ssh state if_emailalerts /SP/clients/smtp state if_network /SP/network state if_snmp /SP/services/snmp mgt_mailalert /SP/alertmgmt/rules mgt_mailhost /SP/clients/smtp address mgt_snmptraps /SP/sevices/snmp v1|v2c|v3 mgt_traphost /SP/alertmgmt/rules /SP/services/snmp port netsc_dhcp /SP/network pendingipdiscovery

Tagged with: , ,

InfoDoc #: 209731 Power down the host system (using the front panel powerbutton) or if an SP admin account exists, you can alternatiely use that accounts ALOM Command Line Interface poweroff command. Unplug the system’s power cord(s) Remove the system’s

Tagged with: , ,

ILOM ALOM CMT Command Comparison ILOM: set /SP/clock datetime=value value format: MMDDhhmmYYYY set /SP reset_to_defaults=all -> reset /SP This resets the SP set /SYS keyswitch_state=value value= normal, diag, stby, locked set target property=value set /SYS/LOCATE value= Fast_Blink or off set

Tagged with: ,

Play Infocom’s classic games. Click the following links to play Infocom’s yesteryear text based games. In your browser settings, allow Popup windows from this website. Each link opens a popup window. Java is required. If a red x in a

Tagged with: , ,
Top