This process is very simple and takes only a few minutes. we’ve performed the fix on several cameras without any problems. This application will map out ALL the pixels if the directions aren’t followed. This application works with the Nikon …
HOWTO: Nikon D100 Hot pixel fix with Q50ImageAdjust Read more »
This connector pinout should work for all Nikon’s with the 10-pin port. This page is for educational use only and not recommended for implementation. Do so at your own risk. Nikon Data Connector Camera Voltages Wire to PC …
<pre> hdparm -B 240 /dev/sda </pre>
I had this problem specifically with Mac OS X 10.3. A series of thumb drives were not being recognized by the Finder or Disk Utility. The fix was quite simple. Remove thumbdrive. Insert a USB device that does work – …
A number of jobs I get are fairly processor intensive so I decided to take a look at .Net’s new Parallel library, wondering how performant it’d be in my (not necessarly your) environment. Implementation is fairly straightforward, with a minor …
Reset network to defaults Power off printer, hold GO button, power on Hold GO button down until all lights are off. Press GO button 6X Print configuration Press GO button 3X within 2 seconds Print WLAN config Press GO button …
Reset a Brother HL-2270DW printer to it’s default settings Read more »
Same as it was in the last version. The task can either be performed through the Server Management Studio designer to code In the designer, select the field ensure it’s an int Set the Column Properties as IsIdentity Or …
How to create an Autonumber field in SQL Server 2012 Read more »
Allowing SQL Server to accept changes to tables through the designer is not recommended. Use Transact-SQL statements to make the changes to the metadata structure of a table. I you must: To change the Prevent saving changes that require the …
Make changes to SQL Server without dropping and recreating table Read more »
Create a code signing certificate without a passphrase. openssl req -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -nodes -days 1001 Post created by: David Gregory Medina
The original code is authored by wilsoncd2 at plexapp.com. https://forums.plexapp.com/index.php/topic/71220-linux-install-for-plex-connect/?hl=linux I modified the script to utilize init.d functions rather than lsb. #!/bin/bash ### BEGIN INIT INFO # Provides: plexconnect # Required-Start: plexmediaserver networking # Required-Stop: plexmediaserver networking # Default-Start: 3 …